| Forum topic | MX2 Dollyshield - Motor 0 will go one direction but not the other. Motor 1 will go both ways. Solder issue? | jabbin | 1 | 4 hours 26 min ago |
| Story | miniE - 2x16 UI and minimal engine | core-moran | 214 | 23 hours 10 min ago |
| Forum topic | Hello from the Netherlands | rjcjacobs | 9 | 3 days 4 hours ago |
| Forum topic | Hello from Amsterdam. | Rocketscientist | 2 | 3 days 10 hours ago |
| Forum topic | MX2 Motion Question | BradM73 | 2 | 4 days 1 hour ago |
| Forum topic | Towards a unified specification for photographic motion control device networks | shutterdrone | 13 | 5 days 1 hour ago |
| Forum topic | Hello from Sunny Seattle (sometimes) | PatrickSeattle | 1 | 5 days 9 hours ago |
| Forum topic | Problems with buttons MX2 | antosevi | 3 | 1 week 2 days ago |
| Book page | TimeIsMotion Project | milapse | 4 | 1 week 2 days ago |
| Forum topic | Hello from Portugal! | pedrorsantos | 1 | 1 week 3 days ago |
| Forum topic | having Merlin mount (used in a few project) wanting to go further in Portugal | bruper | 1 | 1 week 3 days ago |
| Forum topic | MX2 Dollyshield calibration on DIY dolly | Fraa | 4 | 1 week 4 days ago |
| Story | The DollyShield: Arduino Shield for Timelapse Motion Control | shutterdrone | 18 | 1 week 6 days ago |
| Forum topic | DollyShield DIY and i have a problem with loading software on Arduino UNO. | maxiu0 | 3 | 2 weeks 1 day ago |
| Story | eMotimo TB3 | tallbriguy | 0 | 2 weeks 3 days ago |
| Page | MX2 Dolly Engine Version 0.91 | shutterdrone | 0 | 2 weeks 6 days ago |
| Forum topic | Open ended belt selection | lightforms | 9 | 3 weeks 23 hours ago |
| Forum topic | Telescoping Timelapse Crane | disneytoy | 2 | 3 weeks 1 day ago |
| Forum topic | Arduino... now what | gdubya3 | 13 | 3 weeks 1 day ago |
| Forum topic | Calibration settings / measurement unit | itsme | 1 | 3 weeks 3 days ago |
| Forum topic | MicroEngine - Manual Mode | gstruwig | 5 | 3 weeks 6 days ago |
| Forum topic | Keyframes and Actions | eyedesign | 5 | 3 weeks 6 days ago |
| Forum topic | Commercial Pan and Tilt Rig - eMotimo PT | tallbriguy | 5 | 3 weeks 6 days ago |
| Forum topic | Slim HDR script question | cronix | 10 | 3 weeks 6 days ago |
| Forum topic | Minimum uSeconds between motor steps | cronix | 9 | 3 weeks 6 days ago |
